#!/bin/sh
# Pluto database-loading script
# Copyright (C) 1998, 1999, 2001  Henry Spencer.
# 
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
# 
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# RCSID $Id: _plutoload,v 1.1.1.1 2004/08/17 13:06:28 ysc Exp $
#
# exit status is 13 for protocol violation, that of Pluto otherwise

me='ipsec _plutoload'		# for messages

for dummy
do
	case "$1" in
	--load)	plutoload="$2" ; shift	;;
	--start)	plutostart="$2" ; shift	;;
	--wait)	plutowait="$2" ; shift	;;
	--post)	postpluto="$2" ; shift	;;
	--)	shift ; break	;;
	-*)	echo "$me: unknown option \`$1'" >&2 ; exit 2	;;
	*)	break	;;
	esac
	shift
done

# searches, if needed
if test " $plutoload" = " %search"
then
	eval `ipsec _confread --varprefix PLUTO --search auto add route start`
	if test " $PLUTO_confreadstatus" != " "
	then
		echo "auto=add/route/start search: $PLUTO_confreadstatus"
		echo "unable to determine what conns to add -- adding none"
		plutoload=
	else
		plutoload="$PLUTO_confreadnames"
	fi
fi
if test " $plutostart" = " %search"
then
	eval `ipsec _confread --varprefix PLUTO --search auto route start`
	if test " $PLUTO_confreadstatus" != " "
	then
		echo "auto=route/start search: $PLUTO_confreadstatus"
		echo "unable to determine what conns to route -- routing none"
		plutoroute=
	else
		plutoroute="$PLUTO_confreadnames"
	fi
	eval `ipsec _confread --varprefix PLUTO --search auto start`
	if test " $PLUTO_confreadstatus" != " "
	then
		echo "auto=start search: $PLUTO_confreadstatus"
		echo "unable to determine what conns to start -- starting none"
		plutostart=
	else
		plutostart="$PLUTO_confreadnames"
	fi
fi

# the way the searches were done ensures plutoload >= plutoroute >= plutostart

# await Pluto's readiness (not likely to be an issue, but...)
eofed=y
while read saying
do
	case "$saying" in
	'Pluto initialized')	eofed= ; break	;;	# NOTE BREAK OUT
	*)	echo "pluto unexpectedly said \`$saying'"	;;
	esac
done
if test "$eofed"
then
	echo "pluto died unexpectedly!?!"
	exit 13
fi

# database load
for tu in $plutoload
do
	ipsec auto --add $tu ||
		echo "...could not add conn \"$tu\""
done

# enable listening
ipsec auto --ready

# execute any post-startup cleanup
if test " $postpluto" != " "
then
	$postpluto
	st=$?
	if test " $st" -ne 0
	then
		echo "...postpluto command exited with status $st"
	fi
fi

# quickly establish routing
for tu in $plutoroute
do
	ipsec auto --route $tu ||
		echo "...could not route conn \"$tu\""
done

# tunnel initiation, which may take a while
async=
if test " $plutowait" = " no"
then
	async="--asynchronous"
fi
for tu in $plutostart
do
	ipsec auto --up $async $tu ||
		echo "...could not start conn \"$tu\""
done

# report any further utterances, and watch for exit status
eofed=y
while read saying
do
	case "$saying" in
	exit)	eofed= ; break	;;		# NOTE BREAK OUT
	*)	echo "pluto unexpectedly says \`$saying'"	;;
	esac
done
if test "$eofed"
then
	echo "pluto died without exit status!?!"
	exit 13
fi
if read status
then
	exit $status
else
	echo "pluto yielded no exit status!?!"
	exit 13
fi
