T6963c LCD Controller Driver

Driver supports LightControl feature of LCDHype.
Connect LightControl circuit to pin 17 or 4 of LPT (it depends on type of wiring, see below).

Connection to LPT

Common Wiring:
LCD Pin         -> LPT
/HALT           -> Not Connected
/RESET          -> 5 volt
Data0           -> 2
Data1           -> 3
Data2           -> 4 
Data3           -> 5
Data4           -> 6
Data5           -> 7
Data6           -> 8
Data7           -> 9

Original Wiring:
LCD Pin         -> LPT
/WR Data Write  -> 1
/RD Data Read   -> 17 or 5 volt
/CE Chip Enable -> 14
C/D             -> 16

Tweakers.net Wiring:
LCD Pin         -> LPT
/WR             -> 16
/RD             -> 14 or 5 volt
/CE             -> 1
C/D             -> 17