#alloctest 0x2000
set RAMSIZE 0x08000000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# ppp.nostart				 - Set ppp.nostart=1 to disable starting the ppp connection on boot
# msm_sdcc.msmsdcc_fmax      - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode              - The mode used when the phone is off 
#                              0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep, 
#                              3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
#                              Default is 1, use 1 for best power savings
# board-htcpolaris.panel_type - Panel type used to power the panel off and on
#                              0=Don't power off the panel (Default)
#                              1=Sony 2=Topoly 3=Topoly (probably just the same as 2)
# lcd.density                - Defaults to 160, 128 shows more on screen
#
set cmdline "ppp.nostart=0 pm.sleep_mode=1 mddi.width=240 mddi.height=320 no_console_suspend clock-7x00.mddi=0xa51"
boot