Schrittmotor 5V mit Treiber: Unterschied zwischen den Versionen

Aus PUCONwiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 6: Zeile 6:
* 6 Stück aus dieser [http://www.ebay.at/itm/160979358700?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT ebay-Transaktion]
* 6 Stück aus dieser [http://www.ebay.at/itm/160979358700?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT ebay-Transaktion]


•  Motor
* Motor
•  Model: 28BYJ48
* Model: 28BYJ48
•  Operating voltage: 5V
* Operating voltage: 5V
•  Step angle: 5.625°
* Step angle: 5.625°
•  Reduction ratio: 64
* Reduction ratio: 64
•  Pull-in Torque: >300gf.cm
* Pull-in Torque: >300gf.cm
•  Max starting frequency: 500pps
* Max starting frequency: 500pps
•  Max operating frequency: 900pps
* Max operating frequency: 900pps
•  Diameter: 28mm
* Diameter: 28mm
•  ULN2003 Driver board
* ULN2003 Driver board
•  4-Phase (A, B, C, D) LED indication
* 4-Phase (A, B, C, D) LED indication
•  Size: 31 x 35mm
* Size: 31 x 35mm
•  Sample Arduino Sketch [http://www.4tronix.co.uk/files/Stepper.ino >>HERE<<]
* Sample Arduino Sketch [http://www.4tronix.co.uk/files/Stepper.ino >>HERE<<]
•  Specification and Dimensions [http://www.4tronix.co.uk/arduino/specs/28byj48.pdf >>HERE<<]
* Specification and Dimensions [http://www.4tronix.co.uk/arduino/specs/28byj48.pdf >>HERE<<]
•  We also have WHEELS that can be fitted directly to the stepper motor shaft
* We also have WHEELS that can be fitted directly to the stepper motor shaft
•  Also see photos below showing how to connect to the vast range of Lego Technic gears, axles and wheels
* Also see photos below showing how to connect to the vast range of Lego Technic gears, axles and wheels

Version vom 21. Juli 2015, 21:31 Uhr

Arduino 5V 4-Phase Stepper Motor with ULN2003 Control Board

  • Motor
  • Model: 28BYJ48
  • Operating voltage: 5V
  • Step angle: 5.625°
  • Reduction ratio: 64
  • Pull-in Torque: >300gf.cm
  • Max starting frequency: 500pps
  • Max operating frequency: 900pps
  • Diameter: 28mm
  • ULN2003 Driver board
  • 4-Phase (A, B, C, D) LED indication
  • Size: 31 x 35mm
  • Sample Arduino Sketch >>HERE<<
  • Specification and Dimensions >>HERE<<
  • We also have WHEELS that can be fitted directly to the stepper motor shaft
  • Also see photos below showing how to connect to the vast range of Lego Technic gears, axles and wheels
Abgerufen von „http://scherer3002.duckdns.org/wiki/index.php?title=Schrittmotor_5V_mit_Treiber&oldid=1127“