Projekt TekRep7k: Unterschied zwischen den Versionen

Aus PUCONwiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 7: Zeile 7:
{|
{|
|-
|-
| {{PubImg|Hardware/MessWerkZeuge/Tektronix_7000/7623_Mainframe/Disassembly_Repair_HV-board_20151027/007_Start_Of_BotchedOn_Mystery_Wire.JPG|atts=height=300px}}
| {{T7623Img|007_Start_Of_BotchedOn_Mystery_Wire.JPG|atts=height=300px}}
| Starting at the Low Voltage Supply board
| Starting at the Low Voltage Supply board
|-
|-
Zeile 13: Zeile 13:
| snaking to the plug-in bus board
| snaking to the plug-in bus board
|-
|-
| {{T7623Img|Hardware/MessWerkZeuge/Tektronix_7000/7623_Mainframe/Disassembly_Repair_HV-board_20151027/009_Destination_Of_Mystery_Wire_P10_of_Interconn_Board.JPG|atts=height=300px}}
| {{T7623Img|009_Destination_Of_Mystery_Wire_P10_of_Interconn_Board.JPG|atts=height=300px}}
|-
| ... up to P10 of the bus board
| {{PubImg|Hardware/MessWerkZeuge/Tektronix_7000/7623_Mainframe/Disassembly_Repair_HV-board_20151027/009_Destination_Of_Mystery_Wire_P10_of_Interconn_Board.JPG|atts=height=300px}}
| ...
|}
|}

Version vom 10. November 2015, 22:24 Uhr


09.11.2015

There was a "mystery wire" inside the 7623 from the LV supply board running to the plug-in-backpanel:

Starting at the Low Voltage Supply board

snaking to the plug-in bus board
... up to P10 of the bus board