GPIB-USB Adapter

I recently bought an HP 7475A Pen Plotter. This is a nice retro-electronics device representing the market-leader at the time it was introduced.

However, this one has an HP-IB ("Hewlett Packard Interface Bus") Interface, also called GP-IB ("General Purpose Interface Bus") by non HP-vendors and IEEE-488, when standardized by the IEEE. This interface also was a staple of networking for more upperclass electronic instruments, especially measurement and test equipment, before USB or Ethernet became more ubiquitous.

Unfortunately, GPIB Interfaces for computers, never having been cheap, have climbed to ridiculous prices if not completely gone unobtanium.

A more modestly priced product is made by Prologix:

Prologix offizielle website: http://prologix.biz/gpib-usb-controller.html

Verwenden befehle zu beziehen zu Prologix verwandte materialien: http://prologix.biz/gpib-usb-6,0%20-faq.html

Luckily, cheaper clones for more pricey interface products have been devised by makers, this one by "Fenrir":

Https://fenrir.naruoka.org/archives/000944.html

Fenrirs DIY project on Github: https://github.com/fenrir-naru/gpib-usbcdc

This has also be made into a sold product:

EEVblog forum thread: https://www.eevblog.com/forum/testgear/chinese-gpib-diy-adapter-and-how-to-use/

Aliexpress Produkt: https://de.aliexpress.com/i/4000159014648.html

Fahrer und einige der verfügbaren software links: https://pan.baidu.com/s/1i1Is4Mn2fG7fngyJAKWWog
Passwort: pxmp

... which has also gone to unobtainium due to the driver chips no longer readily available.

But there is a variant without these special chips, which seems to work quite OK as there are no long cables to be driven:

... which is nowhere to be got, sooooooo let's build one at home from the schematics

... to be continued ...(zu ergänzen)