PUCONPRT18

PUCONPRT18 ist ein 3D-Drucker der Type anet A8.

Aufbau

=== Information vom Lieferanten:

Dear friend,
We had gotten the tracking code, but here will delay in Fedex during these time, please be patient.
The assemble video in youtube:
https://youtu.be/-tiHfzBQZpI
https://youtu.be/EbNocv6-OOQ
 
The test video in youtube  https://youtu.be/Ml1XGhJF4_E
And few other file in SD card.
 
Any needs please contact us.
Thanks!

• Teil 1: https://www.youtube.com/watch?v=-tiHfzBQZpI&t=104s
  • Update: https://www.youtube.com/watch?v=J8tX-Kfb1og
• Teil 2: https://www.youtube.com/watch?v=EbNocv6-OOQ&feature=youtu.be

Upgrades

• TODO: Heatbed mit MOSFET-Modul schalten

Upgrade-Links

• Playlist von scherer3002, "Anet A8 3D printer"

• Youtube-Video Teil 1 über Firmware Reflash, Belt Tightener, Frame stiffening, ...
• Youtube-Video Teil 2 über Heatbed-Abdeckung, MOSFET-Modul, Belt Guide, Z-Endstop, Bearing Lubrication, Badematte unter Drucker, Cura-Settings
  • Vertex Heat Bed Cover:
    • https://www.amazon.com/Velleman-K8400-BT-Buildtak-Surface-Printer/dp/B00STUMYZC/ref=sr_1_1?ie=UTF8&qid=1483887119&sr=8-1&keywords=vertex+3d+print+bed
    • http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2057872.m570.l1313.TR0.TRC0.H0.X+K8400-BT+Buildtak.TRS0&_nkw=+K8400-BT+Buildtak&_sacat=0
  • Fiber Glass Reinforced Rubber Timing Belt
    • http://www.ebay.com/itm/141938661911?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
  • SCS8UU-8mm-Linear-Ball-Bearing
    • https://www.aliexpress.com/item/6PCS-LOT-SCS8UU-8mm-Linear-Ball-Bearing-Block-CNC-Router-Reprap-3D-printer-DIY-Kit-Accessories/32671316545.html?spm=2114.13010608.0.0.yyZY4V
  • Prusa i3 ANET A8, Z Endstop Adjuster:
    • http://www.thingiverse.com/thing:1930601
  • Anet A8 prusa-i3 X-belt holder:
    • http://www.thingiverse.com/thing:1685768

Reviews etc.

• deutsche Review von Chinagadgets

  YouTube Video dazu

Links

• MOSFET-Modul