0.96in 160x80 Color serial TFT-LCD-Display

Aus PUCONwiki
Zur Navigation springen Zur Suche springen

  • 1Stks 0.96 Inch 8Pin HD Color IPS Screen TFT LCD Display SPI Module For Arduino
  • 1. LCD Size: 0.96 inch
  • 2. Dot Matrix Size: 80*160 (Display direction can be adjusted, horizontal screen and vertical screen are ok)
  • 3. LCD Color: 65K Full Color
  • 4. Hardware Interface: SPI interface
  • 5. Driver IC: ST7735
  • 6. Operating Temperature: -20 - 70
  • 8. Working Power Supply: 3.3V
  • 9. PIN NO: 13Pin
  • 10. Display Area: 10.8*21.696mm
  • 11. Size: 13.3*27.95mm
  • 12 Viewing Direction: Full viewing angle (IPS)
  • Pin Assignment:
    • 1 GND
    • 2 VCC (3.3-5 v)
    • 3 SCL (SPI clock line)
    • 4 SDA (SPI data cable)
    • BLCK-LCD backlight control, the default can be left floating, low level to turn off the backlight
    • RES-OLED reset, OLED needs to be reset after power-on
    • DC-SPI data/command selection pin
    • CS is a chip selection.This signal is called chip selection signal,
      generally cs, chip selection terminal received a legitimate chip selection signal will enter the working state,
      We can write or read it.Bank and chip select are mainly used for address decoding
  • BlogSpot-Artikel von KiCADrookie zu KiCAD-Library dazu
Abgerufen von „http://scherer3002.duckdns.org/wiki/index.php?title=0.96in_160x80_Color_serial_TFT-LCD-Display&oldid=3955“